Lynx Smart BMS 1000amp NG (M10) - LYN034160310 For use with NG series batteries
Part Code: LYNX-BMS-LI-1000-M10-NG
MF Code: LYN034170310
£877.00 ex VAT
£1,052.40 inc VAT
Available in 14 days
Lynx Smart BMS 1000amp NG (M10) - LYN034170310 For use with NG series batteries
Product Information
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).
Out of the various available BMSes, the Lynx Smart BMS is the most feature rich and complete option and integrates seamlessly into the Lynx Distributor system. It is available in 500 A (M8) and 1000 A (M10) versions.
This model will work with Victron's new Lithium NG Batteries.
The main features are:
Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
Battery monitor, indicating state of charge percentage and more data.
Pre-alarm signal: provide a warning before the system shuts down due to -for example - a low cell.
Bluetooth for use with our VictronConnect app, for setup and monitoring, including Instant Readout - key data of the BMS at-a-glance.
Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.
The Lynx Smart BMS is part of the modular Lynx Distribution system.
Programmable relay
The relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed.
VE.Can and NMEA 2000 data communication
VE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed your marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).
Lynx Distributor fuse monitoring
Read out fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx
Distributors and their fuses via VictronConnect or a GX device.
In this video we do a deep dive on the Victron Lynx Smart BMS 500. What's the benefit? How does it work? How do you set it up? It's all in the video:
Please see the datasheet in the Additional Information to compare model specifications.
Additional Information
Related Products
Applications
Marine
Reliable power and control systems for OEM boatbuilders, yards and marine engineers – from helm panels through to fully integrated onboard energy solutions. Every system is built for efficiency and durability.
Find out more
Battery Energy Storage Systems (BESS)
From hand carried battery storage to large commercial installations. Battery energy solutions for demanding environments that deliver consistent performance. Built and supported in the UK by our engineers.
Find out more
Vehicles
Reliable battery and inverter-based solutions that support performance, efficiency and long-term sustainability. Helping engineers and installers transition to more efficient, electrified systems.
Find out more
Electrification
Practical battery-led and hybrid energy solutions for electrification projects with reliable, controllable systems that reduce emissions without compromising performance or reliability.
Find out moreAbout Us
Manufactured In the UK
We design and manufacture a wide range of products in our factory in the UK. We have invested in state of the art cable processing machines to allow us to automate many aspects of our production, guaranteeing quality and consistency. Our engineering department use advanced mechanical and electrical design tools to drive this process, and we use computerised testing machines to speed up loom construction and validation. We also have in-house facilities to laser cut and engrave control panels, along with 3D printing for prototyping components. None of this manufacturing would be possible without a skilled team of staff, with years of experience in complex builds.
Partners
We work with leading international manufacturers and distribute their products in order to supply our customers with a complete electrical power, monitoring and control solution. We work with some of the biggest names in each market sector and have established ourselves as a key supplier bringing new ideas and technical updates on a continual basis.
Support
During your project, Energy Solutions will be with you every step of the way, from initial consultation to final implementation. Our engineering team will provide comprehensive drawing packages, both 2D and 3D as appropriate, and will assist during commissioning phases. Post-project, our service team will take over to provide ongoing support in the field.