Victron Smart BMS CL 12/100
Part Code: BAT-VIC-LI-BMS-CL-12-100
MF Code: BMS110022000
£131.00 ex VAT
£157.20 inc VAT
In Stock
Smart BMS CL 12-100 - BMS110022000
Product Information
The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator.
The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.
The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries.
The BMS is also equipped with a remote on/off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.
Battery Management system
The BMS connects to 12,8V Victron LiFePO4 (LFP) batteries. Up to 5 batteries may be connected in parallel.
Can be used as a system on/off switch.
Starter battery Protection
This function is similar to that of a Cyrix Battery Combiner or Argo FET Battery Isolator. Current can flow to the LFP battery only if the input voltage (= voltage on the starter battery) exceeds 13V.
The current cannot flow back from the LFP battery to the starter battery, thus preventing eventual damage to the LFP battery due to excessive discharge.
Ignition proof
No relays but MOSFET switches and therefore no sparks.
Additional Information
Applications
Marine
Marine is Energy Solutions’ longest established market area, since 1996 we have been working with leading OEM boatbuilders, superyacht owners, boat yards and individual sailing and motor yachts. As well as helping clients find power and control systems that fit their requirements we continually strive to introduce new, innovative products to our customers. We research, design and manufacture in house and provide new ways for our clients to attract customers and set themselves apart in terms of look, efficiency and technology. Working with products from the world’s leading manufacturers we are able to offer clients fully designed systems incorporating all elements form helm panels to tank senders.
Find out more
Battery Energy Storage Systems (BESS)
Battery energy storage can be daunting. We use cutting-edge lithium-ion battery technology for reliable performance and long lifespan. Our solutions range from small-scale 3.6kW battery storage to 500kW large-scale BESS for commercial and utility projects. As one of the UK’s leading battery storage system specialists, we supply hybrid and grid-tied systems across construction, agricultural, manufacturing, telecoms and remote living settings. We’re official distributors for market leading components and assemble all systems in the UK, delivering proven technology backed by engineers who understand your environment.
Find out more
Vehicles
The move towards net zero and a more sustainable world is driving the electrification of many vehicles and onboard equipment that would have traditionally been powered by fossil fuel combustion engines. Energy Solutions' extensive experience and engineering expertise in battery and inverter systems position us well to support and assist clients as they progress towards their own sustainability goals by developing new ways of powering their systems.
Find out more
Electrification
The move towards net zero and a more sustainable world is driving the electrification of many vehicles and onboard equipment that would have traditionally been powered by fossil fuel combustion engines. Energy Solutions' extensive experience and engineering expertise in battery and inverter systems position us well to support and assist clients as they progress towards their own sustainability goals by developing new ways of powering their systems.
Find out moreAbout Us
Manufactured In the UK
We design and manufacture a wide range of products in our factory in the UK. We have invested in state of the art cable processing machines to allow us to automate many aspects of our production, guaranteeing quality and consistency. Our engineering department use advanced mechanical and electrical design tools to drive this process, and we use computerised testing machines to speed up loom construction and validation. We also have in-house facilities to laser cut and engrave control panels, along with 3D printing for prototyping components. None of this manufacturing would be possible without a skilled team of staff, with years of experience in complex builds.
Partners
We work with leading international manufacturers and distribute their products in order to supply our customers with a complete electrical power, monitoring and control solution. We work with some of the biggest names in each market sector and have established ourselves as a key supplier bringing new ideas and technical updates on a continual basis.
Support
During your project, Energy Solutions will be with you every step of the way, from initial consultation to final implementation. Our engineering team will provide comprehensive drawing packages, both 2D and 3D as appropriate, and will assist during commissioning phases. Post-project, our service team will take over to provide ongoing support in the field.