Energy Solutions - Aqualuma Underwater Lights

	AqualumaBuy Now
	Underwater Lighting	Aqualuma Brochure (610 KB) 3 LED end cap (144 KB) 3 LED lens (256 KB) FAQ RINA approval certificate LUX output 3 LED Thread Strength Test
	Underwater Lighting	Visit manufactures website: www.aqualuma.com
Enlightended Technology		Technical Information
Aqualuma lights are the latest technology for marine and underwater applications. Made from virtually bullet-proof, high impact resistant polycarbonate, there is no bonding to anodes required as the housing can not corrode. Each light fitting is a long life, high-output LED light engine emitting very low heat and powered by a 12v to 24v DC power source, using less than 0.5 amp at 12va dn 0.3 amp at 24v DC. Unique Construction The unique feature of the Aqualuma light is in its construction. With no lens seal there is no leakage, and any maintenance can be performed by internal access, without compromising water tight seals. The lights can be used with any type of hull: Aluminium Steel Timber Fibreglass Built from 1 piece injection moulded polycarbonate housing they have a high output LED light engine that is immensely bright and available in three colour choices: Blue Green White Fitting of this incredible light is as simple as drilling a 60mm (2.3/8in) hole; applying the sealer provided, sliding the light into the hole; tightening the nut and connecting the positive & negative wire. The Aqualuma products all carry a 2 year Warranty and any maintenance work is done from inside the vessel.		One piece injection moulded high impact polycarbonate housing No electrical bonding to anodes, can not corrode Suitable for any hull material No seal to leak Virtually bulletproof/pulse tested to over 1300ft below the surface Smooth external protrusion, low drag for fitting to sides of vessel Latest technology high intensity LED light engine, 40-50K hour life expectancy Very low heat emission, can be operated out of water, run with them on Shock and vibration resistant, no filament Internal driver, only 2 wires to connect +/- 12/24v dc Low current draw less than 1/2 an amp @12v Standard or wide beam optics Maintenance done from inside vessel International patent pending

6 Series	TRI COLOUR
Following on from the huge worldwide demand of the AQL 3 series, AQUALUMA releases the 6 series. This new larger option has been designed in response to the large number of requests from the worldís super yacht industry who have very quickly grasped the obvious advantages of the AQUALUMA products. The AQL 6 series is available in the three colours Blue, White and Green. The construction is the same as the proven AQL 3 series, corrosion proof, injection moulded polycarbonate, internally driven and maintained. Corrosion proof, injection molded polycarbonate housing. Front face and sealing fl ange -120mm/4.72" Overall length - 145 mm/5.7" Hole saw size - 76 mm or 3" Operating voltage - 12 or 24 volts DC Operating current - less than 1 amp @ 12V or - less than 1/2 an amp @ 24V. Includes 3.7m/12ft of cabling & AQUALUMA Sealant Available in Blue, Green or White	In yet another world's first, Aqualuma Underwater Lighting introduces the Tri Colour range of LED underwater lights. Utilising the brilliance of the 3 series and the body of the 6 series, AQUALUMA has designed a unique new product. Deciding which AQUALUMA light to purchase has now become easier. With the choice of two colours in the one housing, it gives you three options. You choose to operate either one of these colours for the amazing light show of the AQUALUMA 3 series or run them together and get a mix of the two with the intensity of the AQL 6 series. The AQUALUMA Tri Colour is available in three models. Blue & White, Blue & Green or Green & White. Still manufactured in the same incredibly robust one piece corrosion proof, injection molded polycarbonate housing, the AQUALUMA Tri Colour will give you amazing results with just the flick of a switch. Available in Blue, Green, White & Blue or White & Green Operating Current With 1 of either colors - less than 1/2 amp @ 12 volts With both colours - less than one amp @ 12 volts
	Luma-Vu - New Thru-Hull Underwater Camera
	Aqualuma Underwater Lighting's Luma-Vu system combines a high-definition colour closed circuit television camera fully enclosed in the company's one-piece polycarbonate. This corrosion proof, non-conductive, nearly indestructible housing is the same one used in the construction of Aqualuma Underwater Lighting's LED underwater lighting systems, currently found on top sportfishers, yachts and megayachts around the world. The Luma-Vu camera's housing is built to take a pounding at sea and can safely survive accidental impact with floating debris. Seaworthiness is just part of the "picture" with this sophisticated product. Available with either NTSC or PAL inputs, Aqualuma Underwater Lighting's Luma-Vu can easily be interfaced with compatible marine electronics or video displays for a large, clear image of the underwater world. With an advanced Sony image sensor and a scanning system providing 525 lines in the NTSC version and 625 lines in the PAL version, Luma-Vu delivers a high-resolution, DVD-quality color image. In fact, its 520 TV lines of resolution is the highest of any underwater camera on the market. Aqualuma Underwater Lighting's Luma-Vu has a variety of recreational and professional marine applications, including sport and commercial fishing, diving, snorkelling, survey/research, security, or just exploring. With its clear picture and wide-angle 3.6mm lens, Luma-Vu will give boaters the biggest, best view of the world under their vessels. Aqualuma Underwater Lighting's Luma-Vu cameras also provide a whole new way to enjoy the company's powerful and reliable underwater lighting systems. With the natural fish and life-attracting power of Aqualuma Underwater Lighting LED lights (available in white, blue or green) it can literally be "lights, camera, action!" under your vessel at night. Aqualuma Underwater Lighting's Luma-Vu camera operates on 130mA current and tolerates 12V DC power source ranges from 10V to 15V. Luma-Vu is supplied with plenty of cable and is designed for easy, affordable installation. Aqualuma Underwater Lighting's corrosion-proof polycarbonate housing eliminates the need for bonding wires or anodes.